Eagle Klaw Floor Mat Clips Value Pack

$130.00 USD$109.00 USD0%OFF

FREE Returns

FREE Domestic Shipping Via USPS First Class (2-4 Days) on orders over $30.00

Buy Two Kits, Get Third for 50% Off at checkout

ColorBlackBeigeGray

Quantity20 Mats40 Mats100 Mats

CutterIncludes Free Hole Cutters

Quantity

Are you in the Car Industry? Check out Bulk order Volume Discounts...

Name: Eagle Klaw Floor Mat Clips Value Pack
Brand: Eagle Klaw
Price: 109.0 USD
Availability: InStock
Rating: 4.7 (898 reviews)

Made in the USA
30 Day Money Back Guarantee
Limited Lifetime Warranty

Material: Reinforced Plastic
Vehicle Service Type: Passenger Car, Van, Truck
Fit Type: Universal

Have you noticed out of place front or rear Floor Mats in your car?

If not, check them next time you get in or out.

Sliding floor mats - always annoying.

Car mat jamming the pedals - dangerous.

Fasten your car mat in 3 minutes.

All you have to do to install Eagle Klaw is step on it!

The most secure and easiest way to keep floor mats in place.

Kits include 2 fasteners per mat. Use an optional hole cutter if the mat doesn’t have holes or grommets.

The most secure and easiest way to keep floor mats in place.

Kits include 2 fasteners per mat. Use an optional hole cutter if the mat doesn’t have holes or grommets.

Patented, multi-point tension mounted, minimally intrusive design.

Eagle Klaw works with all floor mats and in all cars that have carpet, vinyl or rubber flooring.

Eagle Klaw grips your car floor with the strength of an eagle’s claw.

Drive safely and keep your car floor nice and clean.

Eagle Klaw grips your car floor with the strength of an eagle’s claw.

Drive safely and keep your car floor nice and clean.

Installation is a Breeze and the Anchors Won't Break if You...

- Read the Instructions carefully before you begin the installation.

- Make sure the car floor has sufficient padding or space under the carpet at the place of Eagle Klaw anchor installation before making holes in the mats.

- Put the cap through the hole, push the sliding washer up onto the cap post. Screw the cap into the anchor until the end of the cap post is even or flush with the bottom of the anchor.

- Place the car mat where you want it to stay. Pre-engage the spikes by pushing the fastener down or tapping on the cap with a hammer slightly to prevent rebound. You can also make small holes in the floor using an awl.

- Stomp down on the Cap or use a hammer to ensure Vertical movement so the Spikes can pierce the floor.

Read the Instructions carefully before you begin the installation.
Make sure the car floor has sufficient padding or space under the carpet at the place of Eagle Klaw anchor installation before making holes in the mats.
Put the cap through the hole, push the sliding washer up onto the cap post. Screw the cap into the anchor until the end of the cap post is even or flush with the bottom of the anchor.
Place the car mat where you want it to stay. Pre-engage the spikes by pushing the fastener down or tapping on the cap with a hammer slightly to prevent rebound. You can also make small holes in the floor using an awl.
Stomp down on the Cap or use a hammer to ensure Vertical movement so the Spikes can pierce the floor.

Don't stomp on Eagle Klaw car mat clips on an angle.

2 Common installation mistakes that cause Negative Reviews

Don't do this...

Don’t tighten the cap into the anchor before you stomp on the cap to install the fastener.

The spikes will break if the cap post sticks out under the anchor.

Do this...

Screw the cap into the anchor until the end of the cap post is even or flush with the bottom of the anchor.

This will ensure that all prongs will be fully inserted without obstruction.

Don't do this...

Don't just engage the spikes with the carpet.

They may come loose or break and the mat will move again.

Do this...

Make sure that all prongs fully penetrate the floor.

Better safe than sorry ORDER EXTRA!

My vehicle is a Custom built Street rod and the floor mats constantly move and wedge under the brake and gas pedal~so annoying!

I was debating ordering the floor mat clips after reading some reviews from other customers who had trouble breaking the claws when installing them on their car floors. I played it safe and ordered 8 when I only needed 4. So glad that I did because I broke 2 of them during installation even trying to be very cautious. My carpet is extra plush and I have 3/16" foam padding under it also. I think it is a great product, but it won't work for all vehicles. Luckily mine are anchored in well after breaking 2 and no more sliding floor mats!

GMC matts are now junk

I have GMC 2018 Sierra. The passengers floor matt is garbage. It will not stay put and curls. I used heat gun to straighten them back out and put the Eagle Claw in. They are a bit taller than what is on driver side, but otherwise work great. No more sliding or curling.

Mats stay in place

I have a 2022 truck and my passenger floor mat would not stay in place. My wife was always adjusting it. After trying many methods to make it stay in place, I found these. They were very easy to install and the mat stays in place as it should. Thank you Eagle Klaw.

My husband put these on passenger side of Ford F 150. Worked perfectly.

Awesome Product

I have fought a sliding rubber floor mat on a vinyl floor in my truck for years. It slid around like being on ice which made getting in and out hard. Not anymore, my mats are rock solid. I wish I would have found these many years ago.

Works great with weather tech and smartliner mats

Works great with weather tech and smartliner mats, needs bit time to be properly installed but when done the mats is going on where, perfect and never damage your carpet.

They worked great!

I bought a set of super thick/luxury Lloyd mats and they came with holes in the mats and cheesy retainers that didn’t work at all. One broke, the other didn’t hold. I searched the internet and found Eagle Klaw. Seemed like a solid design so I ordered a set. They work great! 10x better than the crap that came with my Lloyds mats. I’m about to order another set for another vehicle.

So far, happy!

Working great so far. Time will tell how they last, but I think they will. Thx!

Nice product…

I am happy with the results.. A better way is use the punch as a drill bit to make the holes in your carpet. Back the carpet up with a piece of wood and drill.