Weathertech floor mats are sliding too and that's annoying... 

Incredibly Easy Fix

for your

pesky Weathertech and any other Car Mats

MEET EAGLE KLAW

Car Mat Fastener

  • No need to drill or cut holes in the floor.

  • Takes about 3 minutes to secure your car mat.

  • To install, Just Step On It!

What People Say...

BMW

"Bought these for the aftermarket carpets in my BMW M3. Worked excellent! Very easy to install...make a small hole in carpet with the tool provided, and snap the claws in place. Big improvement over the vehicle's stock velcro/screw mat holders. I've had the Klaws in over a month now and they're still holding strong!"


- Patty Browning

Ford with Weathertech

"I paid a ridiculous amount of money for Weathertech floor mats to go along with my F250 Crew Cab. It was like a surfboard for my rear passengers - always moving around when they got in or out. Bottom line: the Eagle Klaw product is AMAZING and I'd use it again. Best $15 ever spent!" 

 

- Donnie Chase  

Toyota

"Whenever I would get into my stepbrother's Tacoma, the mat was rolled up against the firewall. Got a set of these and they work great. They are well made (in the USA no less!) and do exactly what they claim. There really isn't anything else like it. This is such a common problem that most people ignore, but why not put an end to it? Thanks EagleKlaw!" 


 - Brian Bailie

Ferrari

"Installed these in a 2018 Ferrari. Great quality and install. Fantastic product for sure. The ones Ferrari installed failed within a couple weeks. Thanks Again!!! " 

  

 - Gary Guevin

Incredibly Easy Fix

for your pesky Weathertech and any other Car Mats

Meet Eagle Klaw car mat clips

 - No need to drill or cut holes in the floor. 
 - Takes about 3 minutes to secure your car mat. 
 - To install, Just Step On It!

Why Eagle Klaw Works...

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw! 

The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. Use the optional 3/8" Cutter if your mat doesn't have holes.

When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet.

Due to the spike design, there will be no visible holes in the carpet if you have to remove the anchor, making it minimally intrusive.

Installation is a Breeze!..

  • Check the car floor for sufficient padding

  • Attach Eagle Klaw to your Floor Mat and place it where you want it to stay

  • Use a Hammer, or just step on it. Done!

  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5

1.

If your car mat already has holes, then skip to step 2.


Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.

2.

Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post. 


Don't use the washer if your mat already has pre-made holes.

3.

Screw the cap into the anchor until the bottom of both pieces align...


Repeat Steps 2 and 3 on the other corner of your car mat.

4.

Place the car mat where you want it to stay. 


Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet. 

5.

Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.


Screw the cap in to lock. Done!

Common Questions...

Can Eagle Klaw be installed in all cars?

Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.

How durable is the Eagle Klaw assembly?

Being made from reinforced fiberglass, Eagle Klaw will not fall apart even under stressful conditions, such as emergency braking. Remember, you have to step on it hard to install it in the first place.

How long does it take to install Eagle Klaw?

It takes about 3 minutes to install 2 fasteners for one floor mat. Having pre-installed grommets saves even more time.

Should I replace my current retainer with Eagle Klaw?

If you can flex or move the retainer in the carpet, it may come off when you least expect it. 

What People Say...

BMW

"Bought these for the aftermarket carpets in my BMW M3. Worked excellent! Very easy to install...make a small hole in carpet with the tool provided, and snap the claws in place. Big improvement over the vehicle's stock velcro/screw mat holders. I've had the Klaws in over a month now and they're still holding strong!"


- Patty Browning

Ford with Weathertech

"I paid a ridiculous amount of money for Weathertech floor mats to go along with my F250 Crew Cab. It was like a surfboard for my rear passengers - always moving around when they got in or out. Bottom line: the Eagle Klaw product is AMAZING and I'd use it again. Best $15 ever spent!" 

 

- Donnie Chase  

Toyota

"Whenever I would get into my stepbrother's Tacoma, the mat was rolled up against the firewall. Got a set of these and they work great. They are well made (in the USA no less!) and do exactly what they claim. There really isn't anything else like it. This is such a common problem that most people ignore, but why not put an end to it? Thanks EagleKlaw!" 


 - Brian Bailie

Ferrari

"Installed these in a 2018 Ferrari. Great quality and install. Fantastic product for sure. The ones Ferrari installed failed within a couple weeks. Thanks Again!!!" 


 - Gary Guevin

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw!

Minimally intrusive design...

Patent #142123 

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw!

Minimally intrusive design...

Patent #142123

Why Eagle Klaw Works...

Why Eagle Klaw Works...

The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. Use the optional 3/8" Cutter if your mat doesn't have holes.

The five-legged design provides optimal force distribution and ensures that all spikes are inserted at the same time. 

The fastener doesn't move if you push the mat hard in any direction.

When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet.

Installation is a Breeze!..

- Check the car floor for sufficient padding 

- Attach Eagle Klaw to your Floor Mat and place it where you want it to stay 

- Use a Hammer, or just step on it. Done!

As seen on...

Fasten your Floor Mats...

AND HAVE ONE LESS THING TO WORRY ABOUT

Incredibly Easy Fix for your pesky Weathertech and any other Sliding Car Mats...

Meet Eagle Klaw...

  • No need to drill or cut holes in the floor.

  • Takes about 3 minutes to secure your car mat.

  • To install, Just Step On It!

What People Say...

BMW

"Bought these for the aftermarket carpets in my BMW M3. Worked excellent! Very easy to install...make a small hole in carpet with the tool provided, and snap the claws in place. Big improvement over the vehicle's stock velcro/screw mat holders. I've had the Klaws in over a month now and they're still holding strong!"


- Patty Browning

Ford with Weathertech

"I paid a ridiculous amount of money for Weathertech floor mats to go along with my F250 Crew Cab. It was like a surfboard for my rear passengers - always moving around when they got in or out. Bottom line: the Eagle Klaw product is AMAZING and I'd use it again. Best $15 ever spent!" 

 

- Donnie Chase  

Toyota

"Whenever I would get into my stepbrother's Tacoma, the mat was rolled up against the firewall. Got a set of these and they work great. They are well made (in the USA no less!) and do exactly what they claim. There really isn't anything else like it. This is such a common problem that most people ignore, but why not put an end to it? Thanks EagleKlaw!" 


 - Brian Bailie

Ferrari

"Installed these in a 2018 Ferrari. Great quality and install. Fantastic product for sure. The ones Ferrari installed failed within a couple weeks. Thanks Again!!! " 

  

 - Gary Guevin

Why Eagle Klaw Works...

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw! 

The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. Use the optional 3/8" Cutter if your mat doesn't have holes.

When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet.

Due to the spike design, there will be no visible holes in the carpet if you have to remove the anchor, making it minimally intrusive.

Installation is a Breeze!..

  • Check the car floor for sufficient padding

  • Attach Eagle Klaw to your Floor Mat and place it where you want it to stay

  • Use a Hammer, or just step on it. Done!

  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5

1.

If your car mat already has holes, then skip to step 2.


Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.

2.

Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post. 


Don't use the washer if your mat already has pre-made holes.

3.

Screw the cap into the anchor until the bottom of both pieces align...


Repeat Steps 2 and 3 on the other corner of your car mat.

4.

Place the car mat where you want it to stay. 


Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet. 

5.

Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.


Screw the cap in to lock. 

FAQ

Can Eagle Klaw be installed in all cars?

Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.

How durable is the Eagle Klaw assembly?

Being made from reinforced fiberglass, Eagle Klaw will not fall apart even under stressful conditions, such as emergency braking. Remember, you have to step on it hard to install it in the first place.

How long does it take to install Eagle Klaw?

It takes about 3 minutes to install 2 fasteners for one floor mat. Having pre-installed grommets saves even more time.

Should I replace my current retainer with Eagle Klaw?

If you can flex or move the retainer in the carpet, it may come off when you least expect it. 

BlackGreyBeige
2 Mats / 4 Fasteners4 Mats / 8 Fasteners
No CutterYes, add 3/8" Hole Cutter
[]
Floor Mat Clips for all car mats | Eagle Klaw
$17.75 USD$15.95 USD

Add 3, Get 1 Free At Checkout

  • Free Domestic Shipping Via USPS First Class (3-4 Days)

  • Limited Lifetime Warranty

  • 30 Day Money Back Guarantee

Fasten your Floor Mats...

AND HAVE ONE LESS THING TO WORRY ABOUT

Retention Clips for Weathertech mats old

Weathertech floor mats are sliding too and that's annoying... 

Incredibly Easy Fix

for your

pesky Weathertech and any other Car Mats

MEET EAGLE KLAW

Car Mat Fastener

  • No need to drill or cut holes in the floor.

  • Takes about 3 minutes to secure your car mat.

  • To install, Just Step On It!

What People Say...

BMW

"Bought these for the aftermarket carpets in my BMW M3. Worked excellent! Very easy to install...make a small hole in carpet with the tool provided, and snap the claws in place. Big improvement over the vehicle's stock velcro/screw mat holders. I've had the Klaws in over a month now and they're still holding strong!"


- Patty Browning

Ford with Weathertech

"I paid a ridiculous amount of money for Weathertech floor mats to go along with my F250 Crew Cab. It was like a surfboard for my rear passengers - always moving around when they got in or out. Bottom line: the Eagle Klaw product is AMAZING and I'd use it again. Best $15 ever spent!" 

 

- Donnie Chase  

Toyota

"Whenever I would get into my stepbrother's Tacoma, the mat was rolled up against the firewall. Got a set of these and they work great. They are well made (in the USA no less!) and do exactly what they claim. There really isn't anything else like it. This is such a common problem that most people ignore, but why not put an end to it? Thanks EagleKlaw!" 


 - Brian Bailie

Ferrari

"Installed these in a 2018 Ferrari. Great quality and install. Fantastic product for sure. The ones Ferrari installed failed within a couple weeks. Thanks Again!!! " 

  

 - Gary Guevin

Incredibly Easy Fix

for your pesky Weathertech and any other Car Mats

Meet Eagle Klaw car mat clips

 - No need to drill or cut holes in the floor. 
 - Takes about 3 minutes to secure your car mat. 
 - To install, Just Step On It!

Why Eagle Klaw Works...

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw! 

The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. Use the optional 3/8" Cutter if your mat doesn't have holes.

When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet.

Due to the spike design, there will be no visible holes in the carpet if you have to remove the anchor, making it minimally intrusive.

Installation is a Breeze!..

  • Check the car floor for sufficient padding

  • Attach Eagle Klaw to your Floor Mat and place it where you want it to stay

  • Use a Hammer, or just step on it. Done!

  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5

1.

If your car mat already has holes, then skip to step 2.


Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.

2.

Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post. 


Don't use the washer if your mat already has pre-made holes.

3.

Screw the cap into the anchor until the bottom of both pieces align...


Repeat Steps 2 and 3 on the other corner of your car mat.

4.

Place the car mat where you want it to stay. 


Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet. 

5.

Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.


Screw the cap in to lock. Done!

Common Questions...

Can Eagle Klaw be installed in all cars?

Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.

How durable is the Eagle Klaw assembly?

Being made from reinforced fiberglass, Eagle Klaw will not fall apart even under stressful conditions, such as emergency braking. Remember, you have to step on it hard to install it in the first place.

How long does it take to install Eagle Klaw?

It takes about 3 minutes to install 2 fasteners for one floor mat. Having pre-installed grommets saves even more time.

Should I replace my current retainer with Eagle Klaw?

If you can flex or move the retainer in the carpet, it may come off when you least expect it. 

What People Say...

BMW

"Bought these for the aftermarket carpets in my BMW M3. Worked excellent! Very easy to install...make a small hole in carpet with the tool provided, and snap the claws in place. Big improvement over the vehicle's stock velcro/screw mat holders. I've had the Klaws in over a month now and they're still holding strong!"


- Patty Browning

Ford with Weathertech

"I paid a ridiculous amount of money for Weathertech floor mats to go along with my F250 Crew Cab. It was like a surfboard for my rear passengers - always moving around when they got in or out. Bottom line: the Eagle Klaw product is AMAZING and I'd use it again. Best $15 ever spent!" 

 

- Donnie Chase  

Toyota

"Whenever I would get into my stepbrother's Tacoma, the mat was rolled up against the firewall. Got a set of these and they work great. They are well made (in the USA no less!) and do exactly what they claim. There really isn't anything else like it. This is such a common problem that most people ignore, but why not put an end to it? Thanks EagleKlaw!" 


 - Brian Bailie

Ferrari

"Installed these in a 2018 Ferrari. Great quality and install. Fantastic product for sure. The ones Ferrari installed failed within a couple weeks. Thanks Again!!!" 


 - Gary Guevin

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw!

Minimally intrusive design...

Patent #142123 

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw!

Minimally intrusive design...

Patent #142123

Why Eagle Klaw Works...

Why Eagle Klaw Works...

The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. Use the optional 3/8" Cutter if your mat doesn't have holes.

The five-legged design provides optimal force distribution and ensures that all spikes are inserted at the same time. 

The fastener doesn't move if you push the mat hard in any direction.

When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet.

Installation is a Breeze!..

- Check the car floor for sufficient padding 

- Attach Eagle Klaw to your Floor Mat and place it where you want it to stay 

- Use a Hammer, or just step on it. Done!

As seen on...

Fasten your Floor Mats...

AND HAVE ONE LESS THING TO WORRY ABOUT

Incredibly Easy Fix for your pesky Weathertech and any other Sliding Car Mats...

Meet Eagle Klaw...

  • No need to drill or cut holes in the floor.

  • Takes about 3 minutes to secure your car mat.

  • To install, Just Step On It!

What People Say...

BMW

"Bought these for the aftermarket carpets in my BMW M3. Worked excellent! Very easy to install...make a small hole in carpet with the tool provided, and snap the claws in place. Big improvement over the vehicle's stock velcro/screw mat holders. I've had the Klaws in over a month now and they're still holding strong!"


- Patty Browning

Ford with Weathertech

"I paid a ridiculous amount of money for Weathertech floor mats to go along with my F250 Crew Cab. It was like a surfboard for my rear passengers - always moving around when they got in or out. Bottom line: the Eagle Klaw product is AMAZING and I'd use it again. Best $15 ever spent!" 

 

- Donnie Chase  

Toyota

"Whenever I would get into my stepbrother's Tacoma, the mat was rolled up against the firewall. Got a set of these and they work great. They are well made (in the USA no less!) and do exactly what they claim. There really isn't anything else like it. This is such a common problem that most people ignore, but why not put an end to it? Thanks EagleKlaw!" 


 - Brian Bailie

Ferrari

"Installed these in a 2018 Ferrari. Great quality and install. Fantastic product for sure. The ones Ferrari installed failed within a couple weeks. Thanks Again!!! " 

  

 - Gary Guevin

Why Eagle Klaw Works...

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw! 

The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. Use the optional 3/8" Cutter if your mat doesn't have holes.

When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet.

Due to the spike design, there will be no visible holes in the carpet if you have to remove the anchor, making it minimally intrusive.

Installation is a Breeze!..

  • Check the car floor for sufficient padding

  • Attach Eagle Klaw to your Floor Mat and place it where you want it to stay

  • Use a Hammer, or just step on it. Done!

  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5

1.

If your car mat already has holes, then skip to step 2.


Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.

2.

Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post. 


Don't use the washer if your mat already has pre-made holes.

3.

Screw the cap into the anchor until the bottom of both pieces align...


Repeat Steps 2 and 3 on the other corner of your car mat.

4.

Place the car mat where you want it to stay. 


Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet. 

5.

Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.


Screw the cap in to lock. 

FAQ

Can Eagle Klaw be installed in all cars?

Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.

How durable is the Eagle Klaw assembly?

Being made from reinforced fiberglass, Eagle Klaw will not fall apart even under stressful conditions, such as emergency braking. Remember, you have to step on it hard to install it in the first place.

How long does it take to install Eagle Klaw?

It takes about 3 minutes to install 2 fasteners for one floor mat. Having pre-installed grommets saves even more time.

Should I replace my current retainer with Eagle Klaw?

If you can flex or move the retainer in the carpet, it may come off when you least expect it. 

Based on 962 reviews
83%
(794)
9%
(84)
6%
(58)
1%
(11)
2%
(15)
Great product!

They really work, they hold your floor matts in place.

J
3/8" Hole Cutter
Joseph Hoffman
Quality

My car is a 2020 Subaru Crosstrek. The passenger side doesn’t have a hang mat and it moves too much when people ride with it. When I got the Eagle Klaw, it was very helpful for the mat to no longer move.

Excellent Solution for Moving Car Mats

No more sliding car mat. I installed on my 2020 Honda CRV passenger side. Perfect. Mat stays in place no matter how much it is kicked on. By the way I have Husky heavy duty rubber mats that are lifetime warranty. Eagle Klaw works!

Better safe than sorry ORDER EXTRA!

My vehicle is a Custom built Street rod and the floor mats constantly move and wedge under the brake and gas pedal~so annoying!

I was debating ordering the floor mat clips after reading some reviews from other customers who had trouble breaking the claws when installing them on their car floors. I played it safe and ordered 8 when I only needed 4. So glad that I did because I broke 2 of them during installation even trying to be very cautious. My carpet is extra plush and I have 3/16" foam padding under it also. I think it is a great product, but it won't work for all vehicles. Luckily mine are anchored in well after breaking 2 and no more sliding floor mats!

GMC matts are now junk

I have GMC 2018 Sierra. The passengers floor matt is garbage. It will not stay put and curls. I used heat gun to straighten them back out and put the Eagle Claw in. They are a bit taller than what is on driver side, but otherwise work great. No more sliding or curling.

Mats stay in place

I have a 2022 truck and my passenger floor mat would not stay in place. My wife was always adjusting it. After trying many methods to make it stay in place, I found these. They were very easy to install and the mat stays in place as it should. Thank you Eagle Klaw.

My husband put these on passenger side of Ford F 150. Worked perfectly.

Awesome Product

I have fought a sliding rubber floor mat on a vinyl floor in my truck for years. It slid around like being on ice which made getting in and out hard. Not anymore, my mats are rock solid. I wish I would have found these many years ago.

Works great with weather tech and smartliner mats

Works great with weather tech and smartliner mats, needs bit time to be properly installed but when done the mats is going on where, perfect and never damage your carpet.

They worked great!

I bought a set of super thick/luxury Lloyd mats and they came with holes in the mats and cheesy retainers that didn’t work at all. One broke, the other didn’t hold. I searched the internet and found Eagle Klaw. Seemed like a solid design so I ordered a set. They work great! 10x better than the crap that came with my Lloyds mats. I’m about to order another set for another vehicle.

So far, happy!

Working great so far. Time will tell how they last, but I think they will. Thx!

Nice product…

I am happy with the results.. A better way is use the punch as a drill bit to make the holes in your carpet. Back the carpet up with a piece of wood and drill.

No more sliding

I got tired of mats that slide, and these did the trick in both cars.

Easy to install and mats do not slide.

I installed the Eagle Klaw floor mat clips in my 2004 Mazda RX-8.

The driver floor mat previously would not stay in place.

Oddly enough, the drive side mat had a hole at the seat end of the mat, but there is no hook in the carpet to secure the mat.

As the hole was right in the middle width wise, I simply installed the eagle klaw in that hole, placed the mat, and pushed the talons into the carpet.

The passenger side utilizes a narrow mat, maybe 10 inches wide. I used the hole punch tool to punch the hole at the seat end of the mat, and in the middle width wise.

Once again, I placed the mat, pushed the talons in, and I was done!

BTW, I did ensure there was sufficient carpet depth in each location before completing the install.

Solved my mat securing problem

My 2006 C6 Corvette had OEM floor mats that were secured by flimsy plastic tabs which snapped over oversized floor posts. The tabs broke allowing the mat to creep forward and bunch up behind the gas peddle. Not good!
No one seemed to have a solution until I found a referral to Eagle Klaw!
Problem solved!
And the customer service provided by their staff was outstanding!
I highly recommend them to anyone with a mat problem!

D
Floor Mat Clips for all car mats | Eagle Klaw
David S Yale Yales cleaning service
Great product works just as described

Works great, easy to use, inexpensive, now my floor mats stay put.

Keep those Weather Tech mats in place

For those of you who struggle with keeping your Weather Tech mats in place, fight it no more. Eagle Klaw does the job. Plus, they are easy to install. Great product!

Eagle claw mat clips

Nice and strong easy to install I kicked the s*** 💩💩 out of them to set the klaw into the carpet and they did not break so far so good they hold my new mats in place "will they last who knows only time will tell" my truck is a daily driver so I will put these klaws to the test if they are trash I will let you know

Excellent product

It was very easy to install and clips fit well in my Mazda BT50 carpet.

I installed the eagle claws on my 1932 Ford roadster. It has been in our family since 1951 & was my Dad's drag race car with 82 wins between 1953 & 1956. The carpeting was custom installed in 1980 & the insulation isn't compatible with the eagle claw grippers & won't hold the floormats. So I'm going to cut them off & mount the eagle claws directly to the floor board with screws. That will definitely secure them down. This is in no way any fault of the design.

Tundra passenger side Weathertech

Works as advertised. I put two clips at the top of the mat. I did this so there wouldn't be any holes in the base where water would pool and leak through.

Works great

Installation is pretty straightforward and easy. I have rubber aftermarket floor mats that would not stay put. They already had holes for something to hold them in place but there was a thick lip around the holes which I had to cut out. Otherwise very simple install.

A problem solved

A constant problem in my Mongoose 63 Grand Sport has been the thin rug over the left frame tube (below brake and clutch pedal ) gets ripped up by the heel designs of most shoes . a thin floor mat stops my shoe from ribbing away the rug ,BUT. the floor mat keeps ending up wadded under the pedals. mounting two of your Eagle Claw clips up by the drivers seat base has stopped the mat from moving forward up under the pedals. I drove to several locations over a variety of roads this past weekend with out any problems. thank you for one less worry while driving.

Awesome!!

Works great, as advertised, easy to install in minutes and was easily affordable and worth every penny. Unless sliding mats under your feet don’t bother you. Now all the debris stays on the mat for easy removal. Thanks, EAGLE KLAW! I’ve been waiting for someone to make this very product!

Awesome!

I have a Chevy Tahoe with 2nd row captains chairs which means I have a large T-shaped floor mat that was always wondering all over the place. When I came across Eagle Klaw, I had to give it a try. That mat stays put now even with my 3 kids tromping all over it. Great product and a great value, very happy with my purchase.