Sliding floor mats - annoying 

Car mats jamming pedals - dangerous

Ridiculously Easy Fix

for your

Pesky Mat

MEET EAGLE KLAW

Car Mat Fastener

  • No need to drill or cut holes in the floor.

  • Takes about 3 minutes to secure your car mat.

  • To install, Just Step On It!

Watch Scotty Kilmer, the #1 Car Mechanic on Youtube install Eagle Klaw:

Watch full videos on Scotty's Youtube channel.

What People Say...

BMW

"Bought these for the aftermarket carpets in my BMW M3. Worked excellent! Very easy to install...make a small hole in carpet with the tool provided, and snap the claws in place. Big improvement over the vehicle's stock velcro/screw mat holders. I've had the Klaws in over a month now and they're still holding strong!"


- Patty Browning

Ford with Weathertech

"I paid a ridiculous amount of money for Weathertech floor mats to go along with my F250 Crew Cab. It was like a surfboard for my rear passengers - always moving around when they got in or out. Bottom line: the Eagle Klaw product is AMAZING and I'd use it again. Best $15 ever spent!" 

 

- Donnie Chase  

Toyota

"Whenever I would get into my stepbrother's Tacoma, the mat was rolled up against the firewall. Got a set of these and they work great. They are well made (in the USA no less!) and do exactly what they claim. There really isn't anything else like it. This is such a common problem that most people ignore, but why not put an end to it? Thanks EagleKlaw!" 


 - Brian Bailie

Ferrari

"Installed these in a 2018 Ferrari. Great quality and install. Fantastic product for sure. The ones Ferrari installed failed within a couple weeks. Thanks Again!!! " 

  

 - Gary Guevin

Incredibly Easy Fix

for your Pesky Mat

Meet Eagle Klaw car mat clips

 - No need to drill or cut holes in the floor. 
 - Takes about 3 minutes to secure your car mat. 
 - To install, Just Step On It!

Why Eagle Klaw Works...

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw! 

The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. Use the optional 3/8" Cutter if your mat doesn't have holes.

When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet.

Due to the spike design, there will be no visible holes in the carpet if you have to remove the anchor, making it minimally intrusive.

Installation is a Breeze!..

  • Check the car floor for sufficient padding

  • Attach Eagle Klaw to your Floor Mat and place it where you want it to stay

  • Use a Hammer, or just step on it. Done!

  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5

1.

If your car mat already has holes, then skip to step 2.


Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.

2.

Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post. 


Don't use the washer if your mat already has pre-made holes.

3.

Screw the cap into the anchor until the bottom of both pieces align...


Repeat Steps 2 and 3 on the other corner of your car mat.

4.

Place the car mat where you want it to stay. 


Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet. 

5.

Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.


Screw the cap in to lock. Done!

Watch Scotty Kilmer, the #1 Car Mechanic on Youtube install Eagle Klaw:

Watch full videos on Scotty's Youtube channel.

- Check the car floor for sufficient padding 

- Attach Eagle Klaw to your Floor Mat and place it where you want it to stay 

- Use a Hammer, or just step on it. Done!

Common Questions...

Can Eagle Klaw be installed in all cars?

Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.

How durable is the Eagle Klaw assembly?

Being made from reinforced fiberglass, Eagle Klaw will not fall apart even under stressful conditions, such as emergency braking. Remember, you have to step on it hard to install it in the first place.

How long does it take to install Eagle Klaw?

It takes about 3 minutes to install 2 fasteners for one floor mat. Having pre-installed grommets saves even more time.

Should I replace my current retainer with Eagle Klaw?

If you can flex or move the retainer in the carpet, it may come off when you least expect it. 

What People Say...

BMW

"Bought these for the aftermarket carpets in my BMW M3. Worked excellent! Very easy to install...make a small hole in carpet with the tool provided, and snap the claws in place. Big improvement over the vehicle's stock velcro/screw mat holders. I've had the Klaws in over a month now and they're still holding strong!"


- Patty Browning

Ford with Weathertech

"I paid a ridiculous amount of money for Weathertech floor mats to go along with my F250 Crew Cab. It was like a surfboard for my rear passengers - always moving around when they got in or out. Bottom line: the Eagle Klaw product is AMAZING and I'd use it again. Best $15 ever spent!" 

 

- Donnie Chase  

Toyota

"Whenever I would get into my stepbrother's Tacoma, the mat was rolled up against the firewall. Got a set of these and they work great. They are well made (in the USA no less!) and do exactly what they claim. There really isn't anything else like it. This is such a common problem that most people ignore, but why not put an end to it? Thanks EagleKlaw!" 


 - Brian Bailie

Ferrari

"Installed these in a 2018 Ferrari. Great quality and install. Fantastic product for sure. The ones Ferrari installed failed within a couple weeks. Thanks Again!!!" 


 - Gary Guevin

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw!

Minimally intrusive design...

Patent #142123 

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw!

Minimally intrusive design...

Patent #142123

Why Eagle Klaw Works...

Why Eagle Klaw Works...

The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. Use the optional 3/8" Cutter if your mat doesn't have holes.

The five-legged design provides optimal force distribution and ensures that all spikes are inserted at the same time. 

The fastener doesn't move if you push the mat hard in any direction.

When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet.

As seen on...

Ridiculously Easy Fix for your Pesky Sliding Car Mats...

Meet Eagle Klaw...

  • No need to drill or cut holes in the floor.

  • Takes about 3 minutes to secure your car mat.

  • To install, Just Step On It!

Watch Scotty Kilmer, the #1 Car Mechanic on Youtube install Eagle Klaw:

Click on this Scotty Kilmer's Personal Link to Eagle Klaw on Amazon!

Watch full videos on Scotty's Youtube channel.

What People Say...

BMW

"Bought these for the aftermarket carpets in my BMW M3. Worked excellent! Very easy to install...make a small hole in carpet with the tool provided, and snap the claws in place. Big improvement over the vehicle's stock velcro/screw mat holders. I've had the Klaws in over a month now and they're still holding strong!"


- Patty Browning

Ford with Weathertech

"I paid a ridiculous amount of money for Weathertech floor mats to go along with my F250 Crew Cab. It was like a surfboard for my rear passengers - always moving around when they got in or out. Bottom line: the Eagle Klaw product is AMAZING and I'd use it again. Best $15 ever spent!" 

 

- Donnie Chase  

Toyota

"Whenever I would get into my stepbrother's Tacoma, the mat was rolled up against the firewall. Got a set of these and they work great. They are well made (in the USA no less!) and do exactly what they claim. There really isn't anything else like it. This is such a common problem that most people ignore, but why not put an end to it? Thanks EagleKlaw!" 


 - Brian Bailie

Ferrari

"Installed these in a 2018 Ferrari. Great quality and install. Fantastic product for sure. The ones Ferrari installed failed within a couple weeks. Thanks Again!!! " 

  

 - Gary Guevin

Why Eagle Klaw Works...

World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw! 

The car mat is sandwiched between the cap and the sliding washer when tightened into the anchor. Use the optional 3/8" Cutter if your mat doesn't have holes.

When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet.

Due to the spike design, there will be no visible holes in the carpet if you have to remove the anchor, making it minimally intrusive.

Installation is a Breeze!..

  • Check the car floor for sufficient padding

  • Attach Eagle Klaw to your Floor Mat and place it where you want it to stay

  • Use a Hammer, or just step on it. Done!

  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5

1.

If your car mat already has holes, then skip to step 2.


Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.

2.

Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post. 


Don't use the washer if your mat already has pre-made holes.

3.

Screw the cap into the anchor until the bottom of both pieces align...


Repeat Steps 2 and 3 on the other corner of your car mat.

4.

Place the car mat where you want it to stay. 


Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet. 

5.

Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.


Screw the cap in to lock. 

FAQ

Can Eagle Klaw be installed in all cars?

Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.

How durable is the Eagle Klaw assembly?

Being made from reinforced fiberglass, Eagle Klaw will not fall apart even under stressful conditions, such as emergency braking. Remember, you have to step on it hard to install it in the first place.

How long does it take to install Eagle Klaw?

It takes about 3 minutes to install 2 fasteners for one floor mat. Having pre-installed grommets saves even more time.

Should I replace my current retainer with Eagle Klaw?

If you can flex or move the retainer in the carpet, it may come off when you least expect it. 

Fasten your Floor Mats...

AND HAVE ONE LESS THING TO WORRY ABOUT

BlackGreyBeige
2 Mats / 4 Fasteners4 Mats / 8 Fasteners
No CutterYes, add 3/8" Hole Cutter
[]
Floor Mat Clips for all car mats | Eagle Klaw
$17.75 USD$15.95 USD

Buy 2 Get 1 Free

  • Free Domestic Shipping via USPS First Class

  • Limited Lifetime Warranty

  • 30 Day Money Back Guarantee