No need to drill or cut holes in the floor.
Takes about 3 minutes to secure your car mat.
To install, Just Step On It!
Why It Works
World's only multi-point tension fastener that grips the floor of your car with the strength of an Eagle's Claw!
When you step on the cap, the anchor bends inward and the spikes go through the floor on a slight outward angle. When released, the fastener springs back and the spikes return to a vertical position, gripping the carpet.
Due to the spike design, there will be no visible holes in the carpet if you have to remove the anchor, making it minimally intrusive.
How To Install
Check the car floor for sufficient padding
Attach Eagle Klaw to your Floor Mat and place it where you want it to stay
Use a Hammer, or just step on it. Done!
1.
If your car mat already has holes, then skip to step 2.
Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.
2.
Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post.
Don't use the washer if your mat already has pre-made holes.
3.
Screw the cap into the anchor until the bottom of both pieces align...
Repeat Steps 2 and 3 on the other corner of your car mat.
4.
Place the car mat where you want it to stay.
Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet.
5.
Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.
Screw the cap in to lock. Done!
Reviews
"Bought these for the aftermarket carpets in my BMW M3. Worked excellent! Very easy to install...make a small hole in carpet with the tool provided, and snap the claws in place. Big improvement over the vehicle's stock velcro/screw mat holders. I've had the Klaws in over a month now and they're still holding strong! "
- Patty Browning
"I paid a ridiculous amount of money for Weathertech floor mats to go along with my F250 Crew Cab. It was like a surfboard for my rear passengers - always moving around when they got in or out. Bottom line: the Eagle Klaw product is AMAZING and I'd use it again! "
- Donnie Chase
"Whenever I would get into my stepbrother's Tacoma, the mat was rolled up against the firewall. Got a set of these and they work great. They are well made (in the USA no less!) and do exactly what they claim. There really isn't anything else like it. This is such a common problem that most people ignore, but why not put an end to it? Thanks EagleKlaw! "
- Brian Bailie
FAQ
Can Eagle Klaw be installed in all cars?
Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.
How durable is the Eagle Klaw assembly?
Being made from reinforced fiberglass, Eagle Klaw will not fall apart even under stressful conditions, such as emergency braking. Remember, you have to step on it hard to install it in the first place.
How long does it take to install Eagle Klaw?
It takes about 3 minutes to install 2 fasteners for one floor mat. Having pre-installed grommets saves even more time.
Should I replace my current retainer with Eagle Klaw?
If you can flex or move the retainer in the carpet, it may come off when you least expect it.
Free Domestic Shipping Via USPS First Class (3-4 Days)
Limited Lifetime Warranty
30 Day Money Back Guarantee
An estimated 16,000 car crashes happen each year due to unfastened floor mats. Don't let it happen to you.
Don't waste over $150 on "custom fit floor liners" that never stay in their place anyway. Fasten the mats you already own for a fraction of the price.
Eagle Klaw is the World's Only Multi-Point Tension Car Mat Fastener. It's crafted using Premium Quality Fiberglass Material.
1.
If your car mat already has holes, then skip to step 2.
Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.
2.
Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post.
Don't use the washer if your mat already has pre-made holes.
3.
Screw the cap into the anchor until the bottom of both pieces align...
Repeat Steps 2 and 3 on the other corner of your car mat.
4.
Place the car mat where you want it to stay.
Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet.
5.
Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.
Screw the cap in to lock. Done!
Can Eagle Klaw be installed in all cars?
Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.
How durable is the Eagle Klaw assembly?
Being made from reinforced fiberglass, Eagle Klaw will not fall apart even under stressful conditions, such as emergency braking. Remember, you have to step on it hard to install it in the first place.
How long does it take to install Eagle Klaw?
It takes about 3 minutes to install 2 fasteners for one floor mat. Having pre-installed grommets saves even more time.
Should I replace my current retainer with Eagle Klaw?
If you can flex or move the retainer in the carpet, it may come off when you least expect it.
Does Eagle Klaw Actually Work?
Just ask our customers...