An estimated 16,000 car crashes happen each year due to unfastened floor mats. Don't let it happen to you.
Don't waste over $150 on "custom fit floor liners" that never stay in their place anyway. Fasten the mats you already own for under $10.
Eagle Klaw is the World's Only Multi-Point Tension Car Mat Fastener. It's crafted using Premium Quality Fiberglass Material.
If your car mat already has holes, then skip to step 2.
Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.
Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post.
Don't use the washer if your mat already has pre-made holes.
Screw the cap into the anchor until the bottom of both pieces align...
Repeat Steps 2 and 3 on the other corner of your car mat.
Place the car mat where you want it to stay.
Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet.
Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.
Screw the cap in to lock. Done!