Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.
An estimated 16,000 car crashes happen each year due to unfastened floor mats. Don't let it happen to you.
Don't waste over $150 on "custom fit floor liners" that never stay in their place anyway. Fasten the mats you already own for a fraction of the price.
Eagle Klaw is the World's Only Multi-Point Tension Car Mat Fastener. It's crafted using Premium Quality Fiberglass Material.
1.
If your car mat already has holes, then skip to step 2.
Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.
2.
Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post.
Don't use the washer if your mat already has pre-made holes.
3.
Screw the cap into the anchor until the bottom of both pieces align...
Repeat Steps 2 and 3 on the other corner of your car mat.
4.
Place the car mat where you want it to stay.
Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet.
5.
Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.
Screw the cap in to lock. Done!
Can Eagle Klaw be installed in all cars?
Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.
How durable is the Eagle Klaw assembly?
Being made from reinforced fiberglass, Eagle Klaw will not fall apart even under stressful conditions, such as emergency braking. Remember, you have to step on it hard to install it in the first place.
How long does it take to install Eagle Klaw?
It takes about 3 minutes to install 2 fasteners for one floor mat. Having pre-installed grommets saves even more time.
Should I replace my current retainer with Eagle Klaw?
If you can flex or move the retainer in the carpet, it may come off when you least expect it.
Does Eagle Klaw Actually Work?
Just ask our customers...
An estimated 16,000 car crashes happen each year due to unfastened floor mats. Don't let it happen to you.
Don't waste over $150 on "custom fit floor liners" that never stay in their place anyway. Fasten the mats you already own for a fraction of the price.
Eagle Klaw is the World's Only Multi-Point Tension Car Mat Fastener. It's crafted using Premium Quality Fiberglass Material.
1.
If your car mat already has holes, then skip to step 2.
Otherwise, Use the provided hole puncher to make 2 holes in the rear corners of the mat.
2.
Put the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post.
Don't use the washer if your mat already has pre-made holes.
3.
Screw the cap into the anchor until the bottom of both pieces align...
Repeat Steps 2 and 3 on the other corner of your car mat.
4.
Place the car mat where you want it to stay.
Stomp or Hammer down on the cap several times, as vertically as possible, with enough force for the anchor spikes to penetrate the carpet.
5.
Use a quarter to unscrew the caps. Finish the installation by hand if some of the anchor spikes aren't full inserted.
Screw the cap in to lock. Done!
Can Eagle Klaw be installed in all cars?
Our product is designed to work in all cars that have carpet flooring with sufficient padding or space under it.
How durable is the Eagle Klaw assembly?
Being made from reinforced fiberglass, Eagle Klaw will not fall apart even under stressful conditions, such as emergency braking. Remember, you have to step on it hard to install it in the first place.
How long does it take to install Eagle Klaw?
It takes about 3 minutes to install 2 fasteners for one floor mat. Having pre-installed grommets saves even more time.
Should I replace my current retainer with Eagle Klaw?
If you can flex or move the retainer in the carpet, it may come off when you least expect it.
Does Eagle Klaw Actually Work?
Just ask our customers...